Left Arrow: Press 1x to decrease volume, Press 2x for previous track, Hold to rewind.

Play/Pause: Press 1x to start & stop, Press 2x to toggle shuffle, Hold to turn SYRYN on/off.

Right Arrow: Press 1x to increase volume, Press 2x for next track, Hold to fast forward.

Your Syryn may need to be charged before it’s first use. Plug your Syryn into your computer or wall adapter with the black USB charging cable that’s included.

Your Syryn will show a flashing light while it’s charging, and will show a solid light when it’s fully charged.

Please be careful not to charge your Syryn for more than 3 hours since prolonged time on the charger can cause damage to the battery.

MAC: Step 1

Connect Your SYRYN

Plug your SYRYN into a USB port on your computer.

MAC: Step 2

Select Your SYRYN

Open the Finder App and select your SYRYN. The SYRYN will be listed under the “Devices” section in the left column, likely as “NO NAME”.

MAC: Step 3

Choose Your Tracks

Open a separate Folder of your music, or your desired iTunes playlist.

MAC: Step 4

Drag & Drop Your Files

Highlight all of your files, then click and drag them onto your SYRYN.

It is important that you drag only your audio files directly into the SYRYN. Do not drag folders onto the SYRYN or else your files will not be recognized.

The SYRYN is compatible with AAC, MP3, and WMA files.

MAC: Step 5

Eject Before You Disconnect

Click the “Eject” icon in the devices section within the Finder app (Remember, unless you’ve renamed it, your SYRYN will likely display as “NO NAME”). Ejecting your SYRYN before unplugging will prevent any file corruption.

MAC: Step 6

Disconnect & Test

Once the SYRYN is no longer shown in your devices section of your Finder, unplug the USB cord from the computer.

To test that your music transfer has been successful before going to the pool, plug in a pair of headphones and press PLAY. If you hear music, congrats! You are ready to swim with your SYRYN.

Hold the PLAY button for 3 seconds to turn your SYRYN off.

You can also click here to view our SYRYN Help Guide with lots of useful information about the SYRYN!

MAC: Step 1

Connect Your SYRYN

Plug your SYRYN into a USB port on your computer.

MAC: Step 2

Select Your SYRYN

Open the Finder App and select your SYRYN. The SYRYN will be listed under the “Devices” section in the left column, likely as “NO NAME”.

MAC: Step 3

Choose Your Tracks

Open a separate Folder of your music, or your desired iTunes playlist.

MAC: Step 4

Drag & Drop Your Files

Highlight all of your files, then click and drag them onto your SYRYN.

It is important that you drag only your audio files directly into the SYRYN. Do not drag folders onto the SYRYN or else your files will not be recognized.

The SYRYN is compatible with AAC, MP3, and WMA files.

MAC: Step 5

Eject Before You Disconnect

Click the “Eject” icon in the devices section within the Finder app (Remember, unless you’ve renamed it, your SYRYN will likely display as “NO NAME”). Ejecting your SYRYN before unplugging will prevent any file corruption.

MAC: Step 6

Disconnect & Test

Once the SYRYN is no longer shown in your devices section of your Finder, unplug the USB cord from the computer.

To test that your music transfer has been successful before going to the pool, plug in a pair of headphones and press PLAY. If you hear music, congrats! You are ready to swim with your SYRYN.

Hold the PLAY button for 3 seconds to turn your SYRYN off.

You can also click here to view our SYRYN Help Guide with lots of useful information about the SYRYN!

Please only use the charging cable that is included with your Syryn. Other cables may look similar but will not work to charge or sync your Syryn. Use of other charging cables can damage the Syryn.

The second most common mistake is using files that are not supported. Syryn doesn’t support any music from premium subscription services. The most common sources of music includes music purchased from iTunes or music imported from CD’s.

Please only use the charging cable that is included with your Syryn. Other cables may look similar but will not work to charge or sync your Syryn. Use of other charging cables can damage the Syryn.

The second most common mistake is using files that are not supported. Syryn doesn’t support any music from premium subscription services. The most common sources of music includes music purchased from iTunes or music imported from CD’s.

To "Reset" the SYRYN, unplug it, press and hold the Play/Pause button for at least 10 seconds, then plug it back in.

If that does not work, try again but this time for 30 seconds. So you will unplug, hold pause/play for 30 seconds, and plug in again.

Then, try restarting your computer and do the 30-second restart one more time. The 30 second reset can take up to three tries to work!

To "Reset" the SYRYN, unplug it, press and hold the Play/Pause button for at least 10 seconds, then plug it back in.

If that does not work, try again but this time for 30 seconds. So you will unplug, hold pause/play for 30 seconds, and plug in again.

Then, try restarting your computer and do the 30-second restart one more time. The 30 second reset can take up to three tries to work!

1. 1. 1. 1. 1. 1. 1. Pull up your device in the Finder. Do this by clicking on the Finder App. The SYRYN will be listed under the “Devices” tab.
   2.  
   3. ​2. On the very top left menu of your Finder, hover over the drop-down menu “Go” and click on “Utilities".
   4.  
   5. 3. Scroll down in the Utilities menu and click on “Disk Utility”.
   6.  
   7. 4. The Disk Utilities menu will pop up. Click on your SYRYN player listed under the external devices.
   8.  
   9. 5. Click on the “Erase” option.
   10.  
   11. ​6. Re-enter the name of your device; SYRYN, and proceed to change the Format to MS-DOS (FAT) and change the scheme from "GUID Partition Map" to "Master Boot Record". This is crucial as the device will be damaged with any other file.
   12.  
   13. ​7. Click "Erase." It may take a few moments to finish, but then you can click "Done."
   14. 
       ​8. After restoring your SYRYN to factory settings, check again if your SYRYN will charge by plugging the SYRYN into different USB ports.
   15.  
   16. ​9. After plugging in your SYRYN player, it may take a few moments for the device to begin charging. Wait 10-15 minutes or until the light starts quickly blinking which means the SYRYN is charging. When the light turns solid the SYRYN is fully charged and can be unplugged.
   17.  
   18. Here is a video that will show you how to do it as well!

1. 1. 1. 1. 1. 1. 1. Pull up your device in the Finder. Do this by clicking on the Finder App. The SYRYN will be listed under the “Devices” tab.
   2.  
   3. ​2. On the very top left menu of your Finder, hover over the drop-down menu “Go” and click on “Utilities".
   4.  
   5. 3. Scroll down in the Utilities menu and click on “Disk Utility”.
   6.  
   7. 4. The Disk Utilities menu will pop up. Click on your SYRYN player listed under the external devices.
   8.  
   9. 5. Click on the “Erase” option.
   10.  
   11. ​6. Re-enter the name of your device; SYRYN, and proceed to change the Format to MS-DOS (FAT) and change the scheme from "GUID Partition Map" to "Master Boot Record". This is crucial as the device will be damaged with any other file.
   12.  
   13. ​7. Click "Erase." It may take a few moments to finish, but then you can click "Done."
   14. 
       ​8. After restoring your SYRYN to factory settings, check again if your SYRYN will charge by plugging the SYRYN into different USB ports.
   15.  
   16. ​9. After plugging in your SYRYN player, it may take a few moments for the device to begin charging. Wait 10-15 minutes or until the light starts quickly blinking which means the SYRYN is charging. When the light turns solid the SYRYN is fully charged and can be unplugged.
   17.  
   18. Here is a video that will show you how to do it as well!

1. 1. 1. 1. 1. 1. 1. Pull up the device on your computer’s file explorer. It will appear on the left-hand menu.
               2. 
                  ​2. Right-click on the device. Click on the option that says “Format”.
               3. 
                  ​3. Next, click “Restore device defaults”.
               4. 
                  ​4. Click “Start”.
               5. 
                  ​5. Click “Ok”.
               6. 
                  ​6. You will need to wait a few moments for the restoring process to complete. Then click “Done”.
               7.  

               8. After restoring your SYRYN to factory settings, check again if your SYRYN will charge by plugging the SYRYN into different USB ports.

               9.  

               10. After plugging in your SYRYN player, it may take a few moments for the device to begin charging. Wait 10-15 minutes or until the light starts quickly blinking which means the SYRYN is charging. When the light turns solid the SYRYN is fully charged and can be unplugged.

1. 1. 1. 1. 1. 1. 1. Pull up the device on your computer’s file explorer. It will appear on the left-hand menu.
               2. 
                  ​2. Right-click on the device. Click on the option that says “Format”.
               3. 
                  ​3. Next, click “Restore device defaults”.
               4. 
                  ​4. Click “Start”.
               5. 
                  ​5. Click “Ok”.
               6. 
                  ​6. You will need to wait a few moments for the restoring process to complete. Then click “Done”.
               7.  

               8. After restoring your SYRYN to factory settings, check again if your SYRYN will charge by plugging the SYRYN into different USB ports.

               9.  

               10. After plugging in your SYRYN player, it may take a few moments for the device to begin charging. Wait 10-15 minutes or until the light starts quickly blinking which means the SYRYN is charging. When the light turns solid the SYRYN is fully charged and can be unplugged.